contact@pioneerkitchenvent.com

For the trade

For builders, designers, and dealers.

If you specify hoods for other people's kitchens, we can help you get the type, size, airflow, and duct route right the first time.

Designer holding a fan of color swatches over kitchen plans
Fig. 01Finish samples against a plan

Who we work with

One kitchen or a building full of them.

Builders and remodelers come to us with a plan and a schedule. Kitchen and interior designers come with a look they need the hood to fit. Dealers and showrooms come with customers who want help choosing.

In every case the questions are the same: which hood suits the cooktop and the room, how big it needs to be, and how the duct will get outside.

Builders & remodelers

Hood recommendations per cooktop location, with duct sizes and routes noted, so framing and mechanical rough-in can be planned early.

Kitchen & interior designers

Help choosing a style and finish that suit the design, including inserts sized for custom enclosures.

Dealers & showrooms

Plain-language sizing guidance you can share with customers, and a direct line for project questions.

How a project works

From plans to installed hoods.

Everything runs by email, so there is a written record of every decision.

01

Send the plans

Floor plans or elevations, cooktop specifications, and ceiling heights. PDFs are fine.

02

Review

We look at each cooking location: layout, fuel, burner output, and where a duct can run.

03

Recommendations

Hood type, width, airflow range, and duct size for each location, with notes on makeup air.

04

Quote

Pricing and timing for the hoods you choose, confirmed in writing.

05

Installation questions

Installers can email us with questions during rough-in and final installation.

Kitchen under renovation with cabinets covered in plastic and a hood in place
Fig. 02Rough-in stage, hood mounted before finishes

What to include

The first email.

  • Project type and location (city and state)
  • Number of kitchens and cooktop locations
  • Cooktop or range models, widths, and fuel
  • Ceiling heights and whether each cooktop is on a wall or an island
  • Finish preferences, if known
  • Target dates for rough-in and installation

Questions

Common trade questions.

Can you work from PDF drawings?

Yes. Floor plans, interior elevations, and the cooktop specification sheets are usually all we need to start.

Can you size an insert for a custom enclosure?

Yes. Send the enclosure drawing or the cabinetmaker's shop drawing, and we will check the insert size, filter access, and the space for the duct transition before the enclosure is built.

Do you review duct routes?

We will flag anything that looks like a problem, such as long runs, too many elbows, or a reduced duct size. Final design and code compliance remain with the project's mechanical designer and the local building department.

What about makeup air?

We note every location where the recommended airflow is above 400 CFM, so you can confirm makeup air requirements with the building department early.

Send us the plans.

Attach drawings and specifications to an email. We reply with recommendations for each cooking location.

contact@pioneerkitchenvent.com